2025 New Songs for Xinjiang New Year’s Concert: Singing the New Year’s Prelude in Spiritual Light and Shadow - FENG-YI

2025 New Songs for Xinjiang New Year’s Concert: Singing the New Year’s Prelude in Spiritual Light and Shadow

The night of singing in Xinjiang, the gathering to ignite the New Year. At th...

The night of singing in Xinjiang, the gathering to ignite the New Year. At the beginning of the New Year, the 2025 New Songs for Xinjiang New Year Concert was held in Urumqi Hongshan Gymnasium, singing with passion for the deep love of Xinjiang and welcoming the infinite possibilities of the new year.

At the concert, Langge, Hanggai Band, AThree Rap Group, Matiao, Yasen, Meng Wenhao, Wheat Band, Hongqi, Alpha and other well-known singers and band performed on the same stage, and staged a number of excellent original songs for the audience, such as “The Fragrance of Apple” and “The Sun”. While retaining the distinctive characteristics of Xinjiang,the concert’s repertoire also features modern musical textures, colliding with a unique and marvelous sense of beauty, with each note conveying the love and praise of life of the people of all ethnic groups in Xinjiang.

The large triangular structure formed by the combination of multiple sets of screens became a spectacular background for the concert, coupled with the magnificent and varied light effects, creating a very visual impact of the charm of the scene.The atmosphere was warm.

“Departure, Xinjiang, you are the promise I have waited for a long time; Departure, Xinjiang, you are the peace of mind that I let go of my mind ……” A bright and gorgeous opening light show cum song and dance performance ‘Departure, Xinjiang’ unveiled the surprise of this night.

Like the Milky Way, the flow of light and shadow changes with the rhythm of the music. With light as a pen, accompanied by the flow of notes, Fengyi Lighting’s star product DLB Kinetic bar depicts a beautiful dynamic scroll.

200 DLB Kinetic bars were installed in two groups on the top of the stage, forming a variety of forms, effectively filling the blank above the stage and enriching the overall picture presentation. At the same time, the feelings in the song were visualized and extended in the light and shadow changes, creating an extremely infectious lighting effect, driving the emotional resonance on and off the stage, and singing the New Year’s prelude together.

Songs full of deep feelings sung in Xinjiang, such as a dream-like illusion of light becomes an important medium of emotional expression, and the overall visual presentation of the rounded unity, to create an immersive audio-visual experience for the audience. Witness a night of light and music intertwined.

Recommended for you
US New York -A Lighting Revolution at the Childish Gambino’s The New Would Tour-Dynamic Bar
US New York -A Lighting Revolution at the Childish Gambino’s The New Would Tour-Dynamic Bar
South Korea Seoul -Got7 concert-Dynamic Bar
South Korea Seoul -Got7 concert-Dynamic Bar
Beijing China-CCTV 2019 China Music Awards-Dynamic Bar
Beijing China-CCTV 2019 China Music Awards-Dynamic Bar
South Korea-BTS's "Boy with Luv" performance-Dynamic Bars
South Korea-BTS's "Boy with Luv" performance-Dynamic Bars
Prdoucts Categories
FAQ
Nightclub Lighting
Will the equipment break down easily? How long is the after-sales service?

Our products are designed specifically for the entertainment industry. They feature excellent heat dissipation and can withstand the harsh, high-temperature, high-humidity, and dusty environments of bars. They are guaranteed to operate continuously for 2,000 hours. We offer a one-year warranty starting from the date of delivery (excluding consumables such as bulbs and LEDs). If the product is damaged due to quality issues, the seller will provide a replacement free of charge.

Products
The cutting blades do not move linearly. How to troubleshoot?

Fix with these steps:

1. Channel Check: Ensure the correct cutting channel (e.g., Cut 1: CH24) is selected on the controller; set the channel value to 100-255 (0=no movement).

2. Motor Calibration: Enter "Factory Settings → Motor Calibration → Cut 1" and adjust the offset (-128~+127) to compensate for mechanical errors.

3. Mechanical Blockage: Power off the fixture and check if debris (dust, wire) is blocking the blade’s travel path; clean the path with a soft brush and re-test.

How to set the DMX starting address via the panel?

Follow these steps:

1. Press "Left" (multiple times if needed) to return to the main interface.

2. Press "Up/Down" to select "Settings", then press "OK" to enter.

3. Select "DMX Address" and press "OK" to enter edit mode.

4. Adjust the hundreds digit (e.g., 2 for address 286) with "Up/Down", press "OK" to confirm; repeat for tens (8) and units (6) digits.

5. Press "OK" again to save the address (e.g., A286) and exit edit mode.

The fixture overheats and shuts down. What should I do?

Resolve overheating issues:

1. Environment Check: Ensure the operating temperature ≤60℃; move the fixture away from heat sources (e.g., stage heaters) and ensure 50cm clearance around the fan grille.

2. Fan Maintenance: Clean the fan and fan grille with compressed air (remove dust buildup); check if the fan runs when the fixture is powered on (replace fan if silent).

3. Protection Threshold: Enter "Settings → Temperature Protection" to adjust the threshold (default 60℃, max 80℃) if the environment requires higher operating temperatures.

Want to learn more about the latest updates?

Have questions or ready to illuminate your project? Reach out to our expert team today.

Please enter your name not exceed 100 characters
The email format is not correct or exceed 100 characters, Please reenter!
Please enter a valid phone number!
Please enter your field_1233 not exceed 150 characters
Please select What you're interested in
Please enter your content not exceed 3000 characters

Rest assured that your privacy is important to us, and all information provided will be handled with the utmost confidentiality.

By clicking "Send your message," I agree to your processing my personal data.
To see how to withdraw your consent, how to control your personal data, and how we process it, please see our Privacy Policy and Terms of Use.

Contact customer service

How can we help?

Hi,

We value your needs and feedback. For any inquiries, contact us—we're here to help with expert support. Fill in the details below, and our team will get back to you promptly.

×
Please enter your name not exceed 100 characters
The email format is not correct or exceed 100 characters, Please reenter!
Please enter a valid phone number!
Please enter your field_1233 not exceed 150 characters
Please select What you're interested in
Please enter your content not exceed 3000 characters

Get a free quote

Hi,

Call us to discuss more on your own project!

×
Please enter your name not exceed 100 characters
The email format is not correct or exceed 100 characters, Please reenter!
Please enter a valid phone number!
Please enter your field_1233 not exceed 150 characters
Please select What you're interested in
Please enter your content not exceed 3000 characters

Get the solution

Hi,

Call us to discuss more on your own project!

×
Please enter your name not exceed 100 characters
The email format is not correct or exceed 100 characters, Please reenter!
Please enter a valid phone number!
Please enter your field_1233 not exceed 150 characters
Please select What you're interested in
Please enter your content not exceed 3000 characters

Send my request

Hi,

Call us to discuss more on your own project!

×
Please enter your name not exceed 100 characters
The email format is not correct or exceed 100 characters, Please reenter!
Please enter a valid phone number!
Please enter your field_1233 not exceed 150 characters
Please select What you're interested in
Please enter your content not exceed 3000 characters