professional IP 65 480W Waterproof Beam Light for concerts festivals live shows
◉ Product Features
• Parameter Input & Saving: When entering values (e.g., DMX address), use "UP"/"DOWN" to adjust and press "ENTER" to save to internal memory (persists after power-off).
• Key Confirmation for Critical Settings: Important operations (e.g., bulb on/off, factory reset) trigger a "SURE/NO" confirmation window to avoid misoperation.
• Auto Mode: Runs built-in programs automatically without a controller, suitable for simple scenarios.
• Sound-Activated Mode: Triggers pre-set scenes when strong sounds are detected; maintains the last scene when no sound is present.
• Scene Mode: Supports editing 10 custom scenes (each with channel parameters like color wheel, strobe); auto-cycles scenes if "scene time" (0.1-25.5s) is set (time=scene time × multiplier).
• Screen Protection: 4 modes available: ① "Off": Keep last page; ② "Mode 1": Screen off; ③ "Mode 2": Show DMX address (black screen); ④ "Mode 3": Show logo + address + mode; ⑤ "Mode 4": Mode 3 + screen off after 30s.
• Screen Rotation: "On"/"Off" for inverted display (matches inverted installation).
• Backlight Adjustment: 10 brightness levels (dims after 10s of inactivity, full brightness during operation).
• Screen Lock: "On": Locks after inactivity (re-unlock required for editing); "Off": Unlocks once per power cycle.
• Gobo Wheel: 13 patterns + pattern shaking (70-139) and flow effects (140-255); supports clear pattern projection.
• Strobe: 0-0 (off), 1-50/241-249/253-255 (on), 51-240 (slow-to-fast pulse).
• Focus: 0-255 (far-to-near) for sharp or soft beam projection.
• Prism Function: 2 prisms (insert/remove via CH11/CH13); prism rotation (0-360° manual, 128-255 auto flow).
• Fogging: 0-127 (off), 128-191 (7-color), 192-255 (fog effect) for softening beams.
• Motor Protection: Optical coupling correction (detects XY axis misalignment and auto-corrects); XY axis collision prevention (adjust offset to avoid hitting housing).
• Data Protection: "Data Hold" setting: ① "On": Maintain last DMX data when signal is lost; ② "Off": Reset to initial state.
• Fault Monitoring: Detects temperature sensor failure, fan malfunction, bulb burnout, and motor hall errors; records 8 recent faults (valid for current power cycle).
• Reset Function: Restores lamp to initial position (requires "SURE" confirmation); factory reset clears foreground parameters (background parameters retained).
• XY Axis Adjustment: X/Y axis reverse (for installation direction) and offset (4-150 for X, 4-48 for Y) to calibrate beam position.
◉ Specifications
|
LIGHT SOURCE |
|
| Light Source | Oxtail light source 420W |
| Color Temperature | 8000K |
| Lifespan | 4000H |
| CONTROL | |
| Protocol | DMX512, RDM |
| Personalities | 16CH |
| PHOTOMETRIC DATA | |
| Beam Angle | 2–4° |
| Front Lens | 150mm |
| ELECTRICAL AND CONNECTIONS | |
| Operating Voltage | AC100–240V, 50/60Hz |
| Power Connectors | Waterproof power socket |
| Data Connectors | 3-pin XLR waterproof signal socket input/output (optional 5-pin XLR waterproof signal socket input/output) |
| Maximum Data Connections | 30 (May need an amplifier) |
| Power Consumption | 550W |
| DYNAMIC EFFECTS | |
| Color Wheel | 14 colors + white light |
| Gobo System | 13 fixed gobos + white light |
| Strobe | Double-pitch strobe (0.5–9 times/s) |
| Dimming | 0–100% linear adjustment |
| Prism | The rotating octagonal prism and honeycomb prism with a rainbow effect can be rotated in both directions, and the rotation speed can be adjusted |
| PHYSICAL INFORMATION | |
| Housing | Magnesium alloy with nylon material |
| Installation | Horizontal or vertical or oblique mounting |
| Cooling | Aluminum alloy heat sink with low noise fan / Heat pipe and low noise LP fan |
| IP Rating | IP66 |
| Work Environment | -20–45℃ |
| Fixture Dimensions | 360×262×610 mm |
| Fixture Weight | 21 kg |
| Packing Dimensions | 795×365×505 mm |
| Packing Weight | 23.5 kg |
| Included Items | Integrated lamp hook |
| Optional Accessories | Flight case + foam shell (2 options) |
◉ Product Details
◉ Effect
◉ Project Case Recommendations
US New York -A Lighting Revolution at the Childish Gambino’s The New Would Tour-Kinetic Bar
South Korea Seoul -Got7 concert-Kinetic Bar
Beijing China-CCTV 2019 China Music Awards-Kinetic Bar
South Korea-BTS's "Boy with Luv" performance-Kinetic Bar
China HuNan-Mango TV's "Singer" show in 2025- Kinetic Bar
Macau China- Aaron Kwok's Concert-Dynamic Pixel Ball;Kinetic Beam Ring
Japan Tokyo - ATOM SHINJUKU CLUB -Kinetic Arc light
US Las vegas- Money Baby Nightclub-Dynamic LED sphere-Kinetic frosted Pixel bar
US San Franciso- San Francisco's Yolo Night Club-Kinetic LED Pixel Bar-LED Strip
Macau China-2025 Greater Bay Area Film and Music Gala- Kinetic LED Bars - Kinetic Beam Rings
Dragon’s Dance of Light & Tech: Fengyi Lights up at the Canton Fair with "Dragon's Dance" Exhibit
ShangHai China-2025 Dragon TV Spring Festival Gala-Kinetic Pixel Line;Kinetic LED Bar;Kinetic Beam Ring
Sanya China Illusion club
Sydney Australia-Australia Hotel NoVacancy exhibition-Kinetic Crystal Lights, Kinetic Bulbs, Kinetic Mini Balls
Berlin Germany-The Moon Room-Kinetic Bar
Kinetic Innovation, Leading the Future: Fengyi Stage's DLB Lifting Series Shines at US LDI Show
China Hong Kong-Aaron Kwok Concert-Kinetic X-Bar
China FoShan-Galame Club-Kinetic beam ball
China Hong Kong-The Miss Hong Kong TVB show-Kinetic Triangular panel
South Korea- S. Korea’s AK Shopping Mall-Kinetic Sphere
◉ Applications
The IP480B waterproof pure beam light, with its multi-mode control, precise beam effects, and safety design, is widely applicable to:
◉ Advantages
• Intuitive Display: 1.8-inch color screen + multi-language support lowers learning costs; screen rotation/backlight adjustment adapts to different installation angles and lighting environments.
• RDM Remote Management: Enables remote DMX address setting and fault query, reducing on-site debugging time for multi-lamp installations (e.g., concert stages with dozens of lamps).
• Rich Effects: 15-color wheel, 13-pattern gobo, dual prisms, and fogging meet diverse creative needs (e.g., color transitions for concerts, pattern projections for weddings).
• Bulb & Motor Protection: 30s bulb switch interval and optical coupling anti-collision extend product lifespan; safety rope requirement for inverted installation prevents accidents.
• Data Hold Function: Maintains beam state when DMX signal is lost (avoids sudden blackouts in performances), ensuring show continuity.
◉ Customization Options
Based on basic functions, the following customization services are available (confirmation required in advance):
◉ Packaging & Logistic
Packaging
• Inner Packaging: The lamp body is wrapped in thick EPE foam to prevent collision; accessories (power cable, 3-pin XLR cable, user manual, mounting screws) are individually packed in small boxes and fixed in the same carton.
• Outer Packaging: 5-layer corrugated carton with product model, specifications, and protection labels ("Moisture-Proof", "Shock-Proof", "This Side Up"); single carton holds 1 lamp (gross weight not specified).
• Bulk Packaging: For orders of 10+ units, pallets are used (max. 5 layers per pallet), wrapped in stretch film for dust/moisture protection; wooden pallets facilitate forklift loading/unloading.
Logistics
• Transportation Methods:
◦ Domestic: Road transportation (e.g., Deppon, SF Express), delivery time 2-5 days.
◦ International: Sea freight (suitable for bulk orders, 30-45 days) or air freight (urgent orders, 5-7 days).
• Protection Measures:
◦ Avoid severe vibration, extrusion, or inversion (follow "This Side Up" label); add insulation layers for transportation in high-temperature areas (≤60℃).
◦ For inverted installation accessories (e.g., safety ropes), pack separately to prevent damage.
• Receiving Notes:
◦ Check outer packaging for damage and accessories for completeness upon receipt.
◦ If the lamp is damaged or accessories are missing, take photos and contact the supplier within 48 hours.
◉ Frequently Asked Questions
The cutting blades do not move linearly. How to troubleshoot?
Fix with these steps:
1. Channel Check: Ensure the correct cutting channel (e.g., Cut 1: CH24) is selected on the controller; set the channel value to 100-255 (0=no movement).
2. Motor Calibration: Enter "Factory Settings → Motor Calibration → Cut 1" and adjust the offset (-128~+127) to compensate for mechanical errors.
3. Mechanical Blockage: Power off the fixture and check if debris (dust, wire) is blocking the blade’s travel path; clean the path with a soft brush and re-test.
The X/Y axis moves abnormally (jitter, no response). What causes this?
Address the issue as follows:
1. Mechanical Check: Open the fixture (after power-off) to inspect if the X/Y axis belts are loose or broken; re-tighten or replace belts if needed.
2. Optical Coupling Calibration: Enter "Settings → Motor Calibration → X/Y Axis" to adjust the offset (-128~+127) or enable "Optical Coupling" (auto-corrects step loss).
3. Reset & Restart: Press "Menu → Reset → XY Reset" to reposition the axes; if no response, check the X/Y axis photoelectric switches (replace if "X/Y Hall Error" appears in the error menu).
Do customized products enjoy the same warranty service as standard products?
Yes, customized products have the same warranty policy as standard products (under non-human damage, the whole machine is warranted for 1 year, and LED lamp beads are warranted for 2 years). For faults caused by customized functions (e.g., adaptation issues of the special light control protocol specified by the customer), the after-sales team will give priority to targeted troubleshooting to ensure no impact on use.
Is there a regional protection policy to avoid competition among multiple wholesalers in the same region?
For prefecture-level cities and above, an "exclusive wholesale cooperation" policy is implemented: If there is already a cooperative wholesaler in a region (with an annual purchase amount of ≥ 300,000 RMB), no second wholesaler of the same type will be developed. For county-level regions, 2-3 wholesalers can be developed based on market demand, but clear sales scopes must be divided (e.g., by town) to avoid vicious competition.
What is the MOQ for wholesale cooperation? Is there a tiered pricing policy?
MOQ for wholesale: ≥ 10 units for a single model of conventional lights, and ≥ 5 units for a single model of elevating lights/moving head lights. Tiered pricing is supported: Taking conventional PAR lights as an example, a 5% discount is offered for 10-50 units, a 10% discount for 51-100 units, and a 15% discount for over 100 units. Specific quotations can be negotiated with the account manager based on the cooperation scale (e.g., annual purchase volume).
Your request is safe with us. Share your requirements and we’ll provide the best options for your business.
Rest assured that your privacy is important to us, and all information provided will be handled with the utmost confidentiality.
By clicking "Send your message," I agree to your processing my personal data.
To see how to withdraw your consent, how to control your personal data, and how we process it, please see our Privacy Policy and Terms of Use.
15m120kg High Speed DMX Winch for Professional Kinetic Lighting Systems
As a kinetic lighting winch manufacturer, Fengyi provides integrated solutions combining DMX-controlled winches, kinetic lighting fixtures, control compatibility, programming support and technical guidance for installation and commissioning.
Kinetic LED Lighting Supplier DMX Kinetic Strobe Lighting for Concerts & Live Events
FENG-YI DMX Motorized Kinetic Strobe Lighting for Club Projects
FENG-YI DMX Motorized Kinetic Strobe Lighting is designed for nightclubs, DJ venues, bars, and entertainment spaces seeking dynamic lighting effects and immersive visual experiences. Combining motorized movement with striking strobe effects, this kinetic lighting solution helps create an energetic atmosphere and distinctive lighting designs.
15M 80kg DMX Winch Manufacturer | Kinetic Lighting Winch Supplier - Fengyi
Fengyi 15M 80kg DMX Winch is a professional kinetic lighting lifting solution designed for concerts, stage productions, live events, theaters and large-scale entertainment installations.
With a lifting height of 15 meters and a load capacity of up to 80kg, this DMX-controlled winch provides reliable lifting performance and precise movement control for suspended lighting fixtures and customized kinetic elements.
Kinetic Winch 20m 50kg Heavy Duty Winch for Stage Events and Commercial Use
Fengyi’s 20m 50kg Kinetic Winch is designed for professional stage events, live performances, concerts, exhibitions, and commercial installations. With a lifting height of up to 20 meters and a lifting capacity of 50kg, this heavy-duty kinetic winch enables dynamic movement of suspended lighting fixtures and decorative elements, helping create immersive visual experiences
Kinetic Beam Ring Light – DMX Motorized LED Ring for Stage Lighting
Fengyi Kinetic Beam Ring Light is an innovative kinetic lighting solution designed for concerts, live events, theaters, TV studios, and immersive stage productions. Combining dynamic movement with striking LED lighting effects, it creates eye-catching visual experiences and adds depth and motion to stage designs.
kinetic led panel Motorized Kinetic Lighting for Hotels Concerts Event Contractors
Motorized Kinetic Lighting and Kinetic Panel Light by DLB bring programmable movement and illumination to hotel, concert and event installations. FENG-YI provides integrated project support, from lighting design through implementation.
DMX Winch Manufacturer 20M 30kg Motorized DMX Winch for concerts live events moving stage lighting installation
FENG-YI is a professional DMX winch manufacturer specializing in motorized kinetic lighting systems for concerts, live events, and moving stage lighting installations.
This 20-meter, 30kg DMX winch is designed to create dynamic vertical movements and synchronized lighting effects for professional stage productions. With DMX control integration, it supports flexible lighting programming and creative stage designs.
© 2026 FENG-YI. All Rights Reserved.


Facebook
Instagram
YouTube
TikTok
FENGYI Kinetic Lights Solution