FENG-YI Motion Controlled Stage Lighting
About FENG-YI Motion Controlled Stage Lighting
FENG-YI offers motion controlled stage lighting that turns environments into living, moving artworks. Since 2011, our Guangzhou-based team has focused on creating reliable kinetic lights and user-friendly control systems for television, commercial spaces, cultural performances and entertainment venues across 90+ countries.
What this product does
Our motion controlled stage lighting system synchronizes motors, LEDs and control software to create dynamic visual effects. Pre-programmed sequences or live motion control allow designers and operators to shape light, movement and timing with precision. Systems are Madrix-ready and support on-site installation, programming, and remote technical guidance.
Why choose FENG-YI
- Proven expertise: operating since 2011 with a professional design team and 20+ service technicians.
- Scale and reliability: 6,000㎡ facility and China’s largest 300㎡ art installation exhibition area for testing and demos.
- Global reach: 10 overseas offices and projects delivered in over 90 countries.
- Technical advantage: High Quality Madrix user in mainland China for advanced pixel-mapped control.
Practical benefits
Motion controlled stage lighting from FENG-YI provides clear, practical value: faster setup, repeatable shows, and adaptable designs for different venues. Operators save time with prebuilt motion presets; venue owners attract more audiences with immersive kinetic light displays. Our solutions are scalable—from single installations in retail spaces to large broadcast stages.
Service and support
FENG-YI combines hands-on installation and programming with remote support. Whether you need custom design, on-site commissioning in Huadu District, Guangzhou, or remote troubleshooting, our team ensures smooth deployment and long-term reliability.
Experience motion controlled stage lighting that balances creativity and operational ease. Contact FENG-YI to discuss a tailored kinetic light solution that fits your venue and production needs.
Our Certifications
A type of lighting fixture
A lamp holder, stage lighting equipment
ISO9001
Question you may concern
The lamp does not light up. What should I check?
Troubleshoot in 4 steps:
1. Power Supply: Confirm the input voltage matches AC 200V~240V/50~60Hz; check if the power cable is securely connected and the switch is on.
2. Cooling Period: Ensure the fixture has cooled for 20 minutes after previous use (mandatory cooling to prevent overheat damage).
3. DMX Signal: If in DMX mode, verify the controller is sending "Shutter On" (CH6: 252-255) and "Dimming" (CH7: 100-255) signals.
4. Internal Wiring: If above checks pass, contact after-sales to inspect internal connections (e.g., lamp holder, driver board) for loose or burned components.
What is the XY-axis rotation angle of moving head lights? Are there any load-bearing requirements for installation?
For conventional moving head lights, the X-axis rotation ranges from 0° to 540°, and the Y-axis rotation ranges from 0° to 205° (some models support 16-bit fine adjustment). Installation requirements: For hoisting, the load-bearing capacity of the support frame must be ≥ 1.5 times the weight of the light (e.g., a 10kg moving head light requires a support frame with ≥ 15kg load-bearing capacity). Additionally, a safety rope must be used to pass through the light's handle. When installing at an angle or upside down, pedestrians are prohibited from passing below, and the hook screws and rope wear must be checked regularly.
What is the service life of LED lamp beads? Is professional personnel required for later replacement?
All our lights adopt imported LED chips, with a service life of ≥ 50,000 hours under normal use (8 hours of daily use can last for 17 years). The replacement of lamp beads requires professional operation—due to the involvement of wire soldering and heat dissipation adaptation, unprofessional operation may cause short circuits or uneven light effects. You can contact the after-sales team for on-site replacement or repair-by-mail services.
Can the lighting, screens, and other equipment be combined to achieve integrated sound, lighting, and visuals?
Programming is possible through Madrix and MA consoles, using timecode synchronization to achieve a precise "programmed show" effect.
Kinetic Cross-shaped Light——Ideal for a wide range of large-scale events: commercial spaces, TV shows, concerts, nightclubs, and various other setting
Kinetic Moon Ball Light——Ideal for a wide range of large-scale events: commercial spaces, TV shows, concerts, nightclubs, and various other settings.
Kinetic Bubble Light——Ideal for a wide range of large-scale events: commercial spaces, TV shows, concerts, nightclubs, and various other settings.
Kinetic Mini Ball——Ideal for a wide range of large-scale events: commercial spaces, TV shows, concerts, nightclubs, and various other settings.
© 2025 FENG-YI. All Rights Reserved.


Facebook
Instagram
YouTube
TikTok